 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STD95N2LH5 STU95N2LH5 N-channel 25 V, 0.0038 80 A - DPAK - IPAK , STripFETTM V Power MOSFET Features Type STD95N2LH5 STU95N2LH5 VDSS 25 V 25 V RDS(on) <0.0045 <0.0049 ID 80 A 80 A 3 3 1 RDS(on) * Qg industry benchmark Extremely low on-resistance RDS(on) High avalanche ruggedness Low gate drive power losses 2 1 DPAK IPAK Application Switching applications Figure 1. Internal schematic diagram Description This product utilizes the 5th generation of design rules of ST's proprietary STripFETTM technology. The lowest available RDS(on)*Qg, in the standard packages, makes this device suitable for the most demanding DC-DC converter applications, where high power density is to be achieved. Table 1. Device summary Order codes Marking 95N2LH5 95N2LH5 Package DPAK IPAK Packaging Tape and reel Tube STD95N2LH5 STU95N2LH5 September 2008 Rev 3 1/15 www.st.com 15 Contents STD95N2LH5 - STU95N2LH5 Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 4 5 6 Test circuit ................................................ 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 STD95N2LH5 - STU95N2LH5 Electrical ratings 1 Electrical ratings Table 2. Symbol VDS VGS ID (1) ID IDM (2) PTOT Absolute maximum ratings Parameter Drain-source voltage (VGS=0) Gate-Source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC = 100C Drain current (pulsed) Total dissipation at TC = 25C Derating factor Value 25 22 80 67 320 70 0.47 165 -55 to 175 Unit V V A A A W W/C mJ C EAS (3) Tj Tstg Single pulse avalanche energy Operating junction temperature Storage temperature 1. Limited by wire bonding 2. Pulse width limited by safe operating area 3. Starting Tj = 25C, Id = 40 A, Vdd = 20 V Table 3. Symbol Rthj-case Rthj-amb Tj Thermal resistance Parameter Thermal resistance junction-case max Thermal resistance junction-case max Maximum lead temperature for soldering purpose Value 2.14 100 275 Unit C/W C/W C 3/15 Electrical characteristics STD95N2LH5 - STU95N2LH5 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 4. Symbol V(BR)DSS IDSS IGSS VGS(th) Static Parameter Drain-source breakdown Voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Test conditions ID = 250 A, VGS= 0 VDS = 25 V VDS = 25 V,Tc = 125C VGS = 22 V VDS= VGS, ID = 250 A VGS= 10 V, ID= 40 A SMD version VGS= 10 V, ID= 40 A VGS= 5 V, ID= 40 A SMD version VGS= 5 V, ID= 40 A 1 0.0038 0.0045 0.0044 0.0049 0.005 0.006 0.006 0.007 Min. 25 1 10 100 Typ. Max. Unit V A A nA V RDS(on) Static drain-source on resistance Table 5. Symbol Ciss Coss Crss Qg Qgs Qgd Qgs1 Qgs2 Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Pre Vth gate-to-source charge Post Vth gate-to-source charge Test conditions VDS =25 V, f=1 MHz, VGS=0 VDD=13 V, ID = 80 A VGS =5 V (see Figure 16) VDD=13 V, ID = 80 A (see Figure 19) f=1 MHz gate bias Bias= 0 test signal level=20 mV open drain Min Typ. 1817 420 67 13.4 6.7 4.1 3.5 3.2 Max. Unit pF pF pF nC nC nC nC nC RG Gate input resistance 1.1 4/15 STD95N2LH5 - STU95N2LH5 Electrical characteristics Table 6. Symbol td(on) tr td(off) tf Switching on/off (inductive load) Parameter Turn-on delay time Rise time Test conditions VDD=12.5 V, ID= 40 A, RG= 4.7 , VGS= 10 V (see Figure 15) VDD=12.5 V, ID= 40 A, RG= 4.7 , VGS= 10 V (see Figure 15) Min. Typ. 7 38 Max. Unit ns ns Turn-off delay time Fall time 22 7 ns ns Table 7. Symbol ISD ISDM (1) Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD= 35 A, VGS=0 ISD = 80 A, VDD= 20 V di/dt =100 A/s, (see Figure 17) 32.4 27.1 1.7 Test conditions Min. Typ. Max. 80 320 1.1 Unit A A V ns nC A VSD(2) trr Qrr IRRM 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300 s, duty cycle 1.5% 5/15 Electrical characteristics STD95N2LH5 - STU95N2LH5 2.1 Figure 2. Electrical characteristics (curves) Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Normalized BVDSS vs temperature Figure 7. Static drain-source on resistance 6/15 STD95N2LH5 - STU95N2LH5 Figure 8. Gate charge vs gate-source voltage Figure 9. Electrical characteristics Capacitance variations Figure 10. Normalized gate threshold voltage vs temperature Figure 11. Normalized on resistance vs temperature Figure 12. Source-drain diode forward characteristics 7/15 Test circuit STD95N2LH5 - STU95N2LH5 3 Test circuit Figure 14. Unclamped inductive waveform Figure 13. Unclamped inductive load test circuit Figure 15. Switching times test circuit for resistive load Figure 16. Gate charge test circuit Figure 17. Test circuit for inductive load Figure 18. Switching time waveform switching and diode recovery times 8/15 STD95N2LH5 - STU95N2LH5 Figure 19. Gate charge waveform Id Vds Vgs Test circuit Vgs(th) Qgs1 Qgs2 Qgd 9/15 Package mechanical data STD95N2LH5 - STU95N2LH5 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/15 STD95N2LH5 - STU95N2LH5 Package mechanical data DPAK MECHANICAL DATA mm. DIM. MIN. A A1 A2 B b4 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 5.1 6.4 4.7 2.28 4.4 9.35 1 2.8 0.8 0.6 0.2 0 8 0 1 0.023 0.008 8 4.6 10.1 0.173 0.368 0.039 0.110 0.031 0.039 6.6 0.252 0.185 0.090 0.181 0.397 TYP MAX. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 MIN. 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 0.200 0.260 TYP. MAX. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 inch 0068772-F 11/15 Package mechanical data STD95N2LH5 - STU95N2LH5 TO-251 (IPAK) MECHANICAL DATA DIM. MIN. A A1 A3 B B2 B3 B5 B6 C C2 D E G H L L1 L2 0.45 0.48 6 6.4 4.4 15.9 9 0.8 0.8 0.3 0.95 0.6 0.6 6.2 6.6 4.6 16.3 9.4 1.2 1 0.017 0.019 0.236 0.252 0.173 0.626 0.354 0.031 0.031 2.2 0.9 0.7 0.64 5.2 mm TYP. MAX. 2.4 1.1 1.3 0.9 5.4 0.85 0.012 0.037 0.023 0.023 0.244 0.260 0.181 0.641 0.370 0.047 0.039 MIN. 0.086 0.035 0.027 0.025 0.204 inch TYP. MAX. 0.094 0.043 0.051 0.031 0.212 0.033 H A C C2 L2 D B3 B6 A1 L = = 3 B5 B A3 = B2 = G = E L1 1 2 = 0068771-E 12/15 STD95N2LH5 - STU95N2LH5 Packaging mechanical data 5 Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 16.4 50 22.4 18.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0.795 0.645 0.724 1.968 0.881 BULK QTY 2500 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R W BASE QTY 2500 mm MIN. 6.8 10.4 1.5 1.5 1.65 7.4 2.55 3.9 7.9 1.9 40 15.7 16.3 inch MIN. MAX. 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0.059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1.574 0.618 0.641 MAX. 10.6 12.1 1.6 1.85 7.6 2.75 4.1 8.1 2.1 13/15 Revision history STD95N2LH5 - STU95N2LH5 6 Revision history Table 8. Date 16-Oct-2007 20-Feb-2008 23-Sep-2008 29- Document revision history Revision 1 2 3 First release Modified Table 4.: Static VGS value has been changed on Table 2 and Table 5 Changes 14/15 STD95N2LH5 - STU95N2LH5 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 15/15 |
Price & Availability of STD95N2LH508
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |